LOCTITE HY 4090

Loctite Material Specifications

• LMS dated May-27, 2013 (Part A) and LMS dated June-10,
  2013 (Part B).
• Test reports for each batch are available for the
  indicated properties.
• LMS test reports include selected QC test
  parameters considered appropriate to specifications for
  customer use.
• Additionally, comprehensive controls are in
  place to assure product quality and consistency.
• Special customer specification requirements may be coordinated
  through Henkel Loctite Quality.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2°C to 21°C. Storage below 2°C or
greater than 21°C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.

Applications:

• Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Exterior Repairs, Interior Repairs, Structural Bonding.
• Cure Type: Room Temperature (Ambient) Cure, Two Component Mix
• High moisture resistance
  Vibration, shock loads and impact resistance
  Temperature resistance up to 150 °C
  Gap filling up to 5mm
  UV resistant allowing outdoor applications

FOR DETAILS PLEASE VISIT:

https://www.henkel-adhesives.com/us/en/product/structural-adhesives/loctite_hy_4090.html